EasyManua.ls Logo

Linksys SPA 900 Series - SPA932 Status

Linksys SPA 900 Series
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-54
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
SPA932 Status
SPA932 Status
This page provides two tabs to display the status of up to two SPA932 units that are supported by a single
SPA962:
Unit 1—Displays information about the first SPA932 sidecar unit.
Unit 2—Displays information about the second SPA932 sidecar unit.
Each tab provides the read-only fields described in the following table:
Field Description
Unit Enable Displays if the Unit is enabled or disabled.
Subscribe Expires Displays when the current subscription expires. After the subscription expires, the SPA932
automatically requests a new subscription.
HW Version Displays the version of the hardware.
Unit Online Displays whether the unit is powered on and connected or not.
Subscribe Retry Interval Displays the length of time the SPA932 waits to try again if subscription fails.
SW Version Displays the version of the software currently running on the unit.
Key Name Displays the name assigned to each key (1-32) on the SPA932 sidecar unit.
Type Displays the function enabled for each key (1-32) on the SPA932 sidecar unit.
Line Displays the extension assigned to each key (1-32) on the SPA932 sidecar unit.
Station Displays the subscribe URI configured for each key (1-32) on the SPA932 sidecar unit.

Table of Contents

Related product manuals