Linksys SPA 900 Series - Auto Input Gain (Db); Extension Mobility

5-35
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
Phone Tab
Auto Input Gain (dB)
This section does not apply to the WIP310 wireless phone.
Extension Mobility
Note Some of the parameters in this section do not apply to the WIP310 wireless phone. None of the following
parameters apply to the SPA901.
This section does not apply to the WIP310 wireless phone.
Field Description
Handset Input Gain The amount of amplification to apply to the audio input signal for the handset.
Defaults to zero.
Headset Input Gain
(Not applicable to SPA901)
The amount of amplification to apply to the audio input signal for the headset.
Defaults to zero.
Speakerphone Input Gain
(Not applicable to SPA901)
The amount of amplification to apply to the audio input signal for the speakerphone.
Defaults to zero.
Accoustic Echo Canceller
Enable
Enable or disable the accoustic echo canceller.
Defaults to yes (enable).
Field Description
Extension Mobility Enable or disable extension mobility.
Defaults to no (disabled).
EM User Domain The user domain for extension mobility.
Defaults to blank.