Linksys SPA941 Administrator’s Guide
2
1 Welcome
Overview
Congratulations on purchasing the Linksys SPA941
Internet Phone!
The Linksys SPA941 is a voice over Internet protocol
telephone. It is based on the SIP (Session Initiation)
Protocol, which is by far the most widely used protocol
by Internet telephone service providers (ITSP). The
SPA941 can be directly connected to the Internet to
access the services provided by the ITSPs.
Prior to deploying the Linksys SPA941 to your
customer, it must be configured to point to Net2Phone’s
provisioning server where it downloads its account
information. This manual will guide you through the
process of provisioning each Linksys SPA941 device
via the Linksys Web Interface. Note that the phone will
not function unless Net2Phone’s provisioning server is
configured on the device. Once an account has been
created for the device in the Partner Resource Center
(PRC), it can be rebooted and will download its unique
account information. At this point the phone is ready to
make and receive calls.
1
To Next Page
Loading...
