Linksys SPA941 Administrator’s Guide
3
Configuring the SPA941 with
Net2Phone’s Provisioning Server
NOTE: The provisioning process can be
completed prior to provisioning the
device in the Partner Resource Center.
TO PROVISION THE LINKSYS SPA941:
Connect the phone to your network by following the
instructions in the Linksys SPA941 Quick Start Guide.
Once the phone is connected to the network…
1. Access the phone’s setup menu by pressing
the setup (
) button.
2. Using the navigation button, scroll down to
option 9 Network, and press the select
softkey.
3. From the Network menu, locate the
CurrentIP, and make note of the IP address.
4. From a PC on the same network as the
SPA941, login to the SPA941 Web Interface
by opening your web browser and entering
http://ipaddress
(the IP address obtained in
the previous step).
5. Click the Admin Login link.
To Next Page
Loading...
