Linksys SPA941 Administrator’s Guide
7
Removing VoiceLine Service and
Restoring Factory Defaults
The following procedure removes the VoiceLine
account from the SPA941 IP Phone
1. Login to the Partner Resource Center and
close the device’s account from the Edit
Device Information page.
2. Wait 10 minutes and reboot the device (see
Reboot the SPA941:
on Page 5).
After rebooting, the station LEDs will no longer
be lit, and the LCD will not display the phone
number.
If after rebooting the phone, the phone number is still
visible, wait 10 more minutes and reboot the device
again.
IMPORTANT: If the device will be used for
VoiceLine service again in the future, DO NOT
COMPLETE THE FOLLOWING STEPS!
However, if you would like to restore the phone to its
original factory configuration prior to VoiceLine
provisioning,
3. Press the Setup button (
).
4. Use the navigation button to scroll to option 14
Factory Reset, and press the select softkey.
5. Press the ok softkey to confirm
To Previous Page
Loading...
