Linksys SPA1001

Contents
vii
Linksys ATA Administrator Guide
Document Version 3.1
SIP Timer Values (sec) 5-12
Response Status Code Handling 5-14
RTP Parameters 5-14
SDP Payload Types 5-15
NAT Support Parameters 5-16
Regional Tab 5-19
Call Progress Tones 5-19
Distinctive Ring Patterns 5-21
Distinctive Call Waiting Tone Patterns 5-21
Distinctive Ring/CWT Pattern Names 5-22
Ring and Call Waiting Tone Spec 5-23
Control Timer Values (sec) 5-23
Vertical Service Activation Codes 5-24
Vertical Service Announcement Codes 5-28
Outbound Call Codec Selection Codes 5-28
Miscellaneous 5-30
Line Tab 5-33
Line Enable 5-33
Streaming Audio Server (SAS) 5-33
NAT Settings 5-34
Network Settings 5-35
SIP Settings 5-35
Call Feature Settings 5-38
Proxy and Registration 5-38
Subscriber Information 5-40
Supplementary Service Subscription 5-40
Audio Configuration 5-42
Gateway Accounts (SPA3102/AG310) 5-45
VoIP Fallback to PSTN (SPA3102/AG310) 5-46
Dial Plan 5-46
FXS Port Polarity Configuration 5-47
PSTN Line Tab 5-49
Line Enable 5-49
NAT Settings 5-49
Network Settings 5-50
SIP Settings 5-50
Proxy and Registration (SPA3102/AG310) 5-53
Subscriber Information (SPA3102/AG310) 5-54
Audio Configuration (SPA3102/AG310) 5-55