Linksys SPA1001

Contents
viii
Linksys ATA Administrator Guide
Document Version 3.1
Dial Plans 5-57
VoIP-To-PSTN Gateway Setup 5-57
VoIP Users and Passwords (HTTP Authentication) 5-59
Ring Settings 5-60
FXO (PSTN) Timer Values (sec) 5-60
PSTN Disconnect Detection 5-62
International Control (Settings) 5-63
User 1/2 Tab 5-65
Call Forward Settings 5-65
Selective Call Forward Settings 5-66
Speed Dial Settings 5-67
Supplementary Service Settings 5-67
Distinctive Ring Settings 5-68
Ring Settings 5-68
PSTN User Tab (SPA3102/AG310) 5-70
PSTN-To-VoIP Selective Call Forward Settings 5-70
PSTN-To-VoIP Speed Dial Settings 5-70
PSTN Ring Thru Line 1 Distinctive Ring Settings 5-70
PSTN Ring Thru Line 1 Ring Settings 5-71
PSTN/VoIP Caller Commands via DTMF 5-71
APPENDIX A Acronyms
APPENDIX B Glossary
APPENDIX C User Guidelines
Basic Services
C-1
Originating a Phone Call C-1
Receiving a Phone Call C-2
Enhanced Services C-2
Caller ID C-2
Calling Line Identification Presentation (CLIP) C-2
Calling Line Identification Restriction (CLIR)—Caller ID Blocking C-3
Call Waiting C-3
Disable or Cancel Call Waiting C-4
Call-Waiting with Caller ID C-5
Voice Mail C-5
Attendant Call Transfer C-6
Unattended or “Blind” Call Transfer C-6