Linksys SR216 User Manual

10
16-Port and 24-Port 10/100 Switches
Chapter 3: Connect the Switch
Connection Instructions
Make sure all of the devices you will connect to the Switch are
powered off.
Connect a Category 5 Ethernet network cable to one of the numbered
ports on the Switch. Connect the other end to a computer or other
network device.
Connect the Ethernet Network Cable
Repeat step 2 to connect additional devices.
Connect the supplied power cord to the Switch’s power port. Plug
the other end of the adapter into an electrical outlet.
Power on the devices connected to the Switch. Each active port’s
corresponding LED will light up on the Switch.
Congratulations! The installation of the 10/100 Switch is complete.
1.
2.
3.
4.
5.

Linksys SR216 Specifications

Power

power input	110V AC
internal power	3.3V/3A

Operating Environment

operating temperature	32 to 104ºF (0 to 40ºC)
storage temperature	-40 to 158ºF (-40 to 70ºC)
operating humidity	20 to 95% noncondensing
storage humidity	5 to 90% noncondensing

Weight and Dimensions

unit dimensions	11" x 1.75" x 9.45" (279 x 45 x 240 mm)
unit weight	3.31 lb (1.5 kg)