11
Chapter 4: Using the Console Interface for Configuration
Configuring the Switch through the Console Interface
16- or 24-Port 10/100/1000 Gigabit Switch with WebView
System Configuration Menu
On the System Configuration Menu screen, you have these choices:
1. System Information
2. Management Settings
3. IP Configuration
4. File Management
5. Restore System Default Settings
6. Reboot System
0. Back to main menu
System Information
Using this screen, you can check the Switch’s firmware versions and general system information.
Versions
The Versions screen displays the Switch’s boot, software, and hardware firmware versions.
Figure 4-7: System Information
Figure 4-6: System Configuration Menu
Figure 4-8: Versions
To Next Page
Loading...
