Linksys WRT32X User Manual

17
‘‘Your Internet cable is not plugged in’’ message
•
Make sure that an ethernet cable (like the one included with your router) is securely
connected to the yellow INTERNET port on the back of the router and to the appropriate
port on your modem or modem router. See Step 4 (p. 8
) in setup instructions.
•
Make sure that your modem is connected to power and is turned on. If it has a power switch,
make sure that it is set to the ON or l (as opposed to O) position.
•
If your Internet service is cable, verify that the cable modem’s CABLE port is connected to
the coaxial cable provided by your ISP.

Linksys WRT32X Specifications

General

Wi-Fi Mesh System	no
Band Technology	dual
Frequency Band	2.4 ghz, 5.0 ghz
Ethernet Standard	10/100/1000
Ethernet Switch	yes
Wireless Networking Standard	wi-fi 5
Wireless Standard	ac, n
2.4 Ghz Streams	1
5.0 Ghz Streams	1
Gigabit Ethernet Speed	yes
Antennas	4
Firewall	none
Data Encryption	yes
Encryption Type	wpa, wpa2, wpa2-enterprise, wpa2-personal
Ports	other, rj-45, usb
LAN Ports	4
WAN Ports	1

Weight and Dimensions

Height	2.04 inches
Width	7.63 inches
Net Weight	1.76 pounds