19
To fix the problem on Mac computers:
1.
In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networks
will appear. Linksys Smart Wi-Fi has automatically assigned your network a name.
2.
In the example below, the computer was connected to another wireless network named
wraith_5GHz. The wireless network name of the Linksys WRT32X router,
Damaged_Beez2.4 in this example, is shown selected.
3.
Click the wireless network name of your Linksys WRT32X router (Damaged_Beez2.4 in the
example).
4.
Type your wireless network password (Security Key) into the Password field. Click OK.
After setup
The internet appears to be unavailable
If your router is not communicating with the internet, the problem may appear as a “Cannot find
[Internet address]” message in your web browser. If you know that the internet address is correct,
and if you’ve tried several valid internet addresses with the same result, there could be a problem
with your ISP or your modem or modem router.
Some potential fixes:
•
Make sure that the ethernet and power cables are securely connected.
•
Make sure the power outlet that your router is connected to has power.
•
Contact your ISP and ask about outages in your area.
The most common method of troubleshooting your router is to restart it by turning it off, then
back on again. Your router can then reload its custom settings, and other devices (such as the
modem) will be able to rediscover the router and communicate with it.
To restart your router using the power cord:
1.
Disconnect the power cord from the router and the modem or modem router.
2.
Wait 10 seconds, and reconnect the power cord to the modem or modem router. Make sure
it has power.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
