Chapter 6: Look after your printer
FA69315–3 English 55 Linx 5900 & 7900 Quick Start Guide
5. Press the Start Sequence key. A progress bar shows the progress of
the flush sequence, which takes approximately 2 minutes 20 seconds.
During the sequence, the soft keys are not available.
Figure 6-13. Nozzle Flush sequence
When the sequence stops, the printer displays the information page
shown in Figure 6-12.
6. You can perform more flush sequences or return to the Print Monitor
page.
• To perform more flush sequences, repeat step 5.
• To return to the Print Monitor page, press the Exit key twice.
NOTE: The Nozzle Flush sequence can correct an incorrect nozzle
alignment. If the procedure is not successful, use the Nozzle
Clear option to correct the problem.
To Next Page
Loading...
