Linx 7900 - Page 39

Page 4 of 9 FA69335–3 English
Sep 2014
9
How To Change the Print Settings
Linx 5900 & 7900
To change the Print Width
At the Print Monitor page, press the Print Settings key to display the Print Settings page.
Then select the Print Width option to display the Print Width page:
Figure 2. Print Width page
Use the Up arrow key or the Down arrow key to adjust the value, or use the keyboard to
enter the new value. The Apply key is not available unless you change the value.
Do one of the following:
• Press the Apply key to save the Print Width value and keep the page open.
• Press the OK key to save the setting and return to the Print Settings page. Then press
the Exit key to display the Print Monitor page.
• Press the Cancel key to discard any changes and return to the Print Settings page.
69113