Lipco GSG-NV Series - GSG-NV Components; Filter Types and Maintenance

Operating Manual
Cross-flow fan unit type GSG-NV1 / 2
13 - 64
010980-26-E BA GSG-NV1_2 / 23.03.2012
10. Components of GSG-NV
10.1. Filters
Suction filter – mesh width 0.508 mm:
 The suction filter is in front of
the spray liquid tank.
 The filter insert should be
checked several times daily for
dirt and cleaned, if necessary.
Fig. 1
Pressure filter 1 – mesh width 0.3175 mm:
 The pressure filter is located
between the shut-off motors.
 The filter insert should be
check several times daily for
dirt and cleaned, if necessary.
Drain valve for draining con-
taminated spray liquid.
Fig. 2
Pressure filter 2 – mesh width 0.3175 mm:
 Additional pressure filters in
circuit close to spray nozzles
 The filter inserts must be
checked several times daily
and cleaned, if necessary.
.
Fig. 3