Lipco GSG-NV Series - Nozzle Adjustment During Operation

Operating Manual
Cross-flow fan unit type GSG-NV1 / 2
32 - 64
010980-26-E BA GSG-NV1_2 / 23.03.2012
15.6. Nozzle adjustment during operation
Before blossoming:
During / after blossoming /
with full foliage:
Open only as many nozzles
upward as required by the foli-
age wall.
 90° position to foliage wall
 Pressure 7-8 bar
 Nozzles 80° fan jet or injec-
tor nozzles
Close upper nozzles depend-
ing on the foliage wall height.
 Swivel nozzles 30° up-
ward.
(3rd position)
 Pressure 12 - 15 bar
 Nozzles 80° fan jet
Advantage of injector nozzles:
Reduction of drift to rear