Cross-flow fan unit type GSG-NV1 / 2
010980-26-E BA GSG-NV1_2 / 23.03.2012
3. General safety regulations
The operation of mobile plant protection units is associated with cer-
tain risks. Therefore, you must comply with the following safety regu-
lations:
Before operating the machine, always read the operating manual
and comply with all safety instructions!
Never remove or modify safety devices!
Never enter the area beneath the machine for repairs or inspec-
tions unless the machine is secured!
Prior to performing maintenance or care, make sure that the
machine is switched off!
Always maintain safety clearances!
Caution! Do not enter the work area while the universal joint shat
is rotating! There is an increased risk of accident in case of con-
tact. For your safety, do not wear loose clothing or accessories
(e.g. scarves)!
The LIPCO GSG-NV may be operated, maintained and repaired
only be personnel who are specially trained and are aware of the
risks involved!
The operator is responsible for compliance with applicable acci-
dent prevention regulations, in addition to the generally recog-
nized safety, occupational health and traffic safety regulations!
The warning and information signs on the machine provide im-
portant information for safe operation; compliance with these
warnings will increase your safety!
Persons not involved must keep out of the work area of the ma-
chine.
Keep children away from the LIPCO GSG-NV and spray.
Operate machine only at the specified speed
(max. 540 rpm)!
To Next Page
Loading...
Need help?
General