Lipco GSG-NV Series - Calculation of Driving Speed

Operating Manual
Cross-flow fan unit type GSG-NV1 / 2
28 - 64
010980-26-E BA GSG-NV1_2 / 23.03.2012
15.3. Calculation of the driving speed
The driving speed is calculated based on the following formula:
Driving speed (km/)
=
Measured path (m) x 3.6
Time (sec.)
Sample calculation
based on the following data:
Measured path:
100 m
Driving time:
60 sec.
Calculation:
100 x 3.6
=
360
=
6
60
60
The driving speed is therefore 6 km/h.
Conversion of driving time to driving speed
As an alternative to the above calculation, the approximate driv-
ing speed can be taken from the table below:
Driving speed
(km/h)
Time for 100 m
(sec.)
Driving speed
(km/h)
Time for 100 m
(sec.)
4.0
90.0
6.2
58.1
4.2
85.7
6.4
56.3
4.4
81.8
6.6
54.5
4.6
78.3
6.8
52.9
4.8
75.0
7.0
51.4
5.0
72.0
7.2
50.0
5.2
69.2
7.4
48.6
5.4
66.7
7.6
47.3
5.6
64.3
7.8
46.2
5.8
62.1
8.0
45.0
6.0
60.0