Cross-flow fan unit type GSG-NV1 / 2
010980-26-E BA GSG-NV1_2 / 23.03.2012
Introduction
Dear Customer:
Thank you for choosing a LIPCO Cross-flow fan unit with tank trailer
type GSG-NV1 / 2. We are confident that you will be satisfied with
our product.
In order to achieve maximum performance from your new LIPCO
Cross-flow fan unit with tank trailer type GSG-NV1 / 2 over an ex-
tended period, please follow the instructions in this operating manual
closely. This will help you to prevent any damage and also to prevent
accidents that could result from failure to comply with the manual
and for which LIPCO can assume no liability.
This operating manual is an essential component of the machine and
therefore must always be included when the machine is sold, also if
it is sold to third parties.
By carefully storing the operating manual in a safe place, both you
and the operator will have a comprehensive reference work at hand.
Note:
The illustrations, descriptions and data contained in this operating
manual are not binding. LIPCO reserves the right to make changes
at any time, without prior notice.
To Next Page
Loading...
Need help?
General