Lipco GSG-NV Series - Connecting to Tractor Links; Control Box Installation

Operating Manual
Cross-flow fan unit type GSG-NV1 / 2
21 - 64
010980-26-E BA GSG-NV1_2 / 23.03.2012
 steering drawbar with lower
links for attachment to the
tractor
support
lower link
Fig. 11
 Connect the LIPCO GSG-NV to the respective points of the up-
per and lower links and secure.
Check the bolts of the upper and lower links on the LIPCO GSG-
NV for damage and ensure that they are properly seated.
Movement of the steering bar activated by adequate push button
on control box.
 Support to be fixed in upper position for any movement of GSG-
NV, when fixed to tractor.
 Bolt the control box, using the retaining bracket, to a suitable
location on the tractor.
Control box:
 Connect the control box to an
existing 12-V socket on the
tractor.
Fig. 12