Lipco GSG-NV Series - Filling Strainer and Granulate Addition; Fill Level Indicator Usage

Operating Manual
Cross-flow fan unit type GSG-NV1 / 2
41 - 64
010980-26-E BA GSG-NV1_2 / 23.03.2012
Flushing device:
 Filling strainer for plant protec-
tion agent with integrated
flushing mechanism.
Shut-off valve for water jet
mechanism – manually oper-
ated.
Filling strainer
Fig. 29
 Water-soluble granulates should be added directly over the wa-
ter surface in the spray liquid tank, mixing well.
 Important:
Do not flush in granulates via the filling strainer, since they tend
to clump and can stop up the filling strainer.
 Clean empty plant protection agent containers and dispose of in
accordance with regulations. Cleaning liquid can be added to the
spraying liquid for this purpose.
 Then fill spray liquid tank with water to the calculated level.
Fill level indicator:
 Note the max. fill level of the
spray liquid tank on the fill level
indicator.
Fill level indicator
Do not fill past the maximum
tank capacity.
Fig. 30