Lipco GSG-NV Series - Pump Oil Change Intervals; Air Receiver Pressure Check

Operating Manual
Cross-flow fan unit type GSG-NV1 / 2
50 - 64
010980-26-E BA GSG-NV1_2 / 23.03.2012
 First oil change of approx. 50 hours of operation, or at the end of
the season.
 Further oil changes after every 500 hours of operation, or at the
end of the season.
 Use SAE 20W 40 oil: quantity = 1.35 l
 Check the membranes annually for damage; if they need to be
replaced, use only LIPCO original replacement parts.
Air receiver:
Valve for pressure check of air
receiver.
 Set the pressure of the air re-
ceiver to approx. 20% of the
spraying pressure and check
occasionally.
Fig. 38
Pump pressure control valve:
Safety button
 If the pump safety control valve
is activated for any reason,
then push the safety button in
all the way after eliminating the
cause.
Fig. 39
 Check all hydraulic connections, chains, springs and spray hose
connections regularly to ensure that they are tight.