Lippert Basecamp - Level Zero Point Calibration

Rev: 05.26.23 Page 10 CCD-0007708
Fig. 8
E. Attach an orange roadside rear extend hose from the manifold to a tee fitting (Fig. 8A) on the
roadside mid-rear jack (Fig. 8).
F. Attach an orange curbside rear extend hose from the manifold to a tee fitting (Fig. 8B) on the
curbside mid-rear jack (Fig 8).
G. Attach a black retract hose from the manifold to a tee fitting (Fig. 8C) in the curbside mid-rear jack.
H. Attach an orange roadside rear extend hose from the tee fitting on the roadside mid-rear jack to a
90 deg. elbow fitting (Fig. 8D) on the roadside rear jack (Fig. 8).
I. Attach an orange curbside rear extend hose from the tee fitting on the curbside mid-rear jack to a
90 deg. elbow fitting (Fig. 8E) on the curbside rear jack (Fig. 8).
J. Attach a black retract hose between the tee fittings on the curbside (Fig. 8G) and roadside (Fig. 8H)
rear jacks.
K. Attach a black retract hose from the tee fitting on the roadside rear jack to the 90 deg. elbow
fitting on the roadside mid-rear jack (Fig. 8J).
B
C
D
Curbside
Mid-Rear
Jack
Curbside
Rear Jack
Roadside
Rear Jack
Roadside
Mid-Rear
Jack
F
A
E
G
H
J