Rev: 05.26.23 Page 17 CCD-0007708
Error Codes
Make sure the trailer is supported at both the front and rear with jack stands before performing any
troubleshooting or service to the trailer. Failure to do so may result in death or personal injury.
NOTE: Do not lift the trailer by the axles. The axles were not designed as a viable lift-point
When the leveling controller detects an error, it will be presented to the user on the screen, along with some
instructions for troubleshooting when appropriate. Most faults (Fig. 21) will clear automatically when the
fault condition no longer exists.
1. To hide the message while troubleshooting, press HIDE MESSAGE (Fig. 21A).
2. An error message can be viewed at any time by pressing the caution icon in the OPTIONS SCREEN (Fig.
22A).
3. A caution icon will appear next to options button on the main screens until the fault is cleared (Fig.
23A).
4. To manually clear the fault, press CLEAR FAULT (Fig. 21B).
NOTE: Some faults will remain until the fault condition no longer exists.
Fig. 21
Fig. 22
Fig. 23
A
A B
A
To Next Page
Loading...
