Lippert JT's Strong Arm User Manual

1
lippert.com 432-LIPPERT (432-547-7378) Rev. 09.29.23
JT’s Strong Arm
™
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0001455
Table of Contents
Introduction ............................................ 2
Safety ................................................... 2
Parts List ................................................ 3
Resources Required ................................... 4
Preparation ............................................. 4
Front Jack Installation ................................. 4
Side to Side Bracket Install ............................ 4
Option 1 ............................................... 5
Option 2 ............................................... 5
Option 3 ............................................... 5
Option 4 ............................................... 6
Option 5 ............................................... 6
Front to Rear Bracket Installation ...................... 7
Option 1 ............................................... 7
Option 2 ............................................... 7
Jack Clevis Assembly ................................. 8
Front to Rear Stabilizer Assembly ..................... 8
Stabilizer Tube Assembly .............................. 8
Rear Jack Installation .................................. 9
JT’s Strong Arm
TM
Installation and
Owner’s Manual
(For Aftermarket Applications)
JT’s Strong Arm Aftermarket Kits
Part # Description
191023
Jack Stabilizer, 5th Wheel - 58” or more between
front jacks
191024
Jack Stabilizer, 5th Wheel, Short - Less than 58”
between front jacks
Side to Side Stabilizer Assembly ...................... 9
Scissor Jack Option ................................... 9
Telescoping Rear Jack Option ......................... 9
Other Chassis Options ................................. 9
C-Chanel Uninsulated Option ....................... 10
C-Chanel or Tube Insulated Option .................. 10
Apply Labels .......................................... 10
Operation ............................................. 10
Maintenance .......................................... 10
Hydraulic Jack Adapter Lugs ........................ 11
Parts List ............................................ 11
Resources Required ................................. 11
Preparation .......................................... 11
Installation ........................................... 11
Notes .................................................. 12

Lippert JT's Strong Arm Specifications

General

Category	Automobile Accessories
Material	Steel
Installation	Bolt-On
Finish	Powder-Coated
Type	Stabilizer
Adjustable Height	Yes
Compatibility	Travel Trailers
Features	Reduces chassis movement and swaying

Summary

Safety

General Safety Warnings

Crucial safety warnings regarding operation and potential hazards.

Ground Clearance Warning

Warning against lifting the trailer completely off the ground, creating an unstable condition.

Support Recommendations Warning

Warning to support the trailer per manufacturer's recommendations before working underneath.

Leveling System Operation Warning

Warning to unlock Strong Arms before retracting jacks with automatic leveling systems.

Front Jack Installation

Side to Side Bracket Install

Instructions for installing side-to-side stabilizer brackets based on chassis measurements and type.

Front to Rear Bracket Installation

Option 1 - Fig. 4

Option 2 - Fig. 5

Jack Clevis Assembly

Front to Rear Stabilizer Assembly

Rear Jack Installation

Scissor Jack Option

Telescoping Rear Jack Option

Other Chassis Options

Operation

Maintenance

Hydraulic Jack Adapter Lugs

Installation