Lippert Unity X4 - Latching Relay Settings - Faults and Timeouts; DSI Fault Input and Activation Timeout

Rev: 05.06.23 Page 15 CCD-0007005
24. DSI FAULT INPUT (Fig. 35): Scroll down to DSI FAULT INPUT.
25. Choose one of the options (Fig. 36): Not Set, 1 to16.
26. Press SET (Fig. 36A). Saved! will replace Loaded! on the screen (Fig. 37A).
Fig. 34 Fig. 35
Fig. 36 Fig. 37
A
A
A