41
cable. The remote keypad can be mounted on control panels with screws thread M4 X P0.7 and the
screw length longer than the thickness of panel door.
3.5 Keypad Remote Usage
Keypad mounted on the drive can be removed and connected to the drive using an extension cable
to facilitate operation when the drive is installed in a location where it cannot be easily accessed. It
can also be permanently mounted remote locations such as panel doors using an extension cable and
an installation support set.
3.5.1 Remote Operation
3.5.1.1 Remote Operation (<5.5kW models)
To Next Page
Loading...
