LiteOn EVO 6800 Series - Page 76

73
11
Non-Slip
Setting Dial
ENTER Key:
◼ Enters parameter value, parameter
and setting
◼ Enters parameter setting menu.
Dial:
Increases or decreases parameter
numbers, setting value and frequency
12
RUN Light
Refer to Table 5.1.2.2
13
RPM Light
Refer to Table 5.1.2.2
14
Hz Light
Refer to Table 5.1.2.2
No
Button
Name
Function
1
FN1 Key
User-defined function key for Quick
Setting Mode
2
FWD/REV Key
Forward/reverse selection
3
RESET Key
◼ Moves the cursor to the right
◼ Resets the drive to clear a fault
situation