LiteOn EVO 6800 Series - Page 80

77
5.1.2.2 LED Indication
Table 5.3.2.2 LED Indication
Indicator Light
Lit
Blinking
Off
Drive in operation
◼ Drive in deceleration
◼ Output frequency below
the minimum frequency
Drive not in operation
Displaying output
speed
Nil
Nil
Displaying output
frequency
Nil
Nil
5.1.2.3 LO/RE、EXT LED Light display
EXT
LO/RE
Lights
Local
OFF (Only Control On Keypad)
ON
Green
Remote
Off(When the source is set to Keypad operation)
OFF
OFF
ON
OFF
Red
5.1.3 Keypad Programming
◼ Keypad Display Menu Structure
A. Standard setting mode: Press MENU to enter or exit the parameter group. Press ENTER, MENU,
UP, DOWN and RESET to monitor and edit settings.
B. Quick monitoring parameters mode: FN2 function keys for using quickly most of the
parameters monitored, and use the up and down keys to switch parameters want to monitor.