5
When completed, pressto return to the main
menu.
6
Press or SETUP to completely exit the Setup
menu.
If you press or ENTER instead of number buttons
(0-9) when you are asked to enter a password, you
will return to the second level of the menu without
making any change.
If the password you enter is incorrect or unmatched, a
warning message will appear for 5 seconds, and then
you will be asked to enter your password again.
If you have forgotten your password, reset the DVD
recorder via Setup → System → Restore.
Setting Aspect Ratio
Aspect ratio setting affects how video images are
presented. Select 4:3 (standard) or 16:9 (widescreen)
mode which suits your television.
▌ 16:9 Wide
Select this option if you connect the DVD recorder to
a widescreen (16:9) TV.
▌ 4:3 L. Box (4:3 Letter Box)
Select this option if you connect the DVD recorder to
a standard (4:3) TV, and wish to display widescreen
image (16:9) in its original format.
For the ‘Menu’, ‘Audio’ and ‘Subtitle’ options, the
selected preference is applicable only when the discs
have the desired language versions.
Setting Parental Lock
Some DVD-Video discs are encoded with a Parental
Management Level (PML) numbered from 0 to 8. You
can set the parental control level of this DVD recorder
to one of the numbers, then only a DVD-Video disc
with the PML lower than the one you set can be
played back by this DVD recorder.
1
Enter the ‘DVD Movie’ menu via SETUP → DVD
Movie.
2
Press to select ‘Parental Lock’, then press
ENTER.
3
If the level you select is different from the one you
set before, an input box asking for password will
appear. Enter the 4-digit password by pressing
number buttons (0-9).
If you press or ENTER instead of number buttons,
you will return to the upper level of the menu without
making any change.
4
If the password you enter is correct, the change
you made will be applied. Otherwise, the change
will be ignored.
5
When completed, pressto return to the main
menu.
6
Press or SETUP to completely exit the Setup
menu.
Setting Password
1
Enter the ‘DVD Movie’ menu via SETUP → DVD
Movie.
2
Press to select ‘Password’, then press
ENTER.
3
Press number buttons (0-9) to enter your password.
4
If the password you enter is correct, you will
be asked to enter a new password twice. If two
passwords do not match, a warning message will
appear.
To Next Page
Loading...
