61
Playback
The ‘Cancel’ function is only available when both
point A and point B are set.
The ‘A-B Repeat’ setting will be canceled when you
bring the program to a marked stop or a full stop.
Subtitle
On some pre-recorded DVDs, there may be more
than one subtitle language. If the DVD-Video disc is
already preset to a default language, the playback
will start following this setting, but you can use the
Navigation menu to select a different language at any
time during playback.
1 Press to select a subtitle language, then
press ENTER.
Audio
On some pre-recorded DVD discs, there may be
more than one audio language. If the DVD-Video disc
is already preset to a default language, the playback
will start following this setting, but you can use the
Navigation menu to select a different language at any
time during playback.
1 Press to select an audio language, then press
ENTER.
When VCD/SVCD is selected for playback, sound
options will be: Normal, SWAP, Left and Right.
Angle
Some pre-recorded DVD discs contains scenes shot
from different camera angles. You can choose to
view these camera angles during playback.
1 Press to select a camera angle, then press
ENTER.
Information
During playback, you can select to display the disc
information on the top of the screen or to hide it.
1 Press to select ‘On’ or ‘Off’, then press
ENTER.
If you select ‘On’, disc information will appear on the
top of the screen.
Different categories of information will be shown
depending on the media type.
To Next Page
Loading...
