Using Remote Control
Preparing the Remote Control
Open the battery compartment and insert the
batteries. Make sure the polarities (+ and -) match
the markings inside the remote control.
Note
• Do not use rechargeable batteries.
Remote Control Signal
The remote has a range of approximately 5M
and works best when pointed directly at the unit
horizontally at angles up to 30° from the sensor
window of the DVD recorder.
Easier Application with Remote Control
Function buttons, such as GUIDER or TIMER,
are designed to offer you a quick access to intended
applications. Press these buttons to go directly to
their individual menus and complete your desired
tasks. If you would like to quit an application,
simply press the designated button again.
To Next Page
Loading...
