LiteOn LVW-5115GHC+ - Erasing a Title

66
8
If you switch on the function, a pen icon will
be shown next to the overwritten title on the
disc menu.
Editing_01_03
Note
• After the ‘Overwrite’ function is switched on,
new recording will be saved in the slot previously
occupied by the overwritten title. If the new
program lasts longer than the old one, it will be
recorded continuously. To prevent accidental era-
sure, it is suggested that you activate the ‘Protect’
function for the title immediately following the
overwritten one.
• Available recording time shown for the overwrit-
ten slot may not be exact, as it is likely to be
affected by the recording mode of the overwritten
title.
Erasing a Title
Important
Use this function to erase a title. Please note that
once erased, the title(s) CANNOT be retrieved.
1
Press OPEN/CLOSE to open the disc tray.
2
Carefully place the disc on the tray with the
label side facing up, then press OPEN/
CLOSE.
3
A disc menu will appear. Press  to
select the title you would like to edit, then
press ENTER.
4
Playback will then start.
5
Press EDIT to display the Edit menu.
6
On the Edit menu, press  to select ‘Erase’,
then press ENTER.
Editing_01_08
7
Press ENTER to confi rm your setting.
The title selected will be erased.
8
To erase more titles, repeat steps 3 to 6. Or
press  to select ‘Exit’, then press ENTER
to exit the setting.
9
After you complete the process, a deleted title
will be shown on the disc menu, if you use a
DVD+RW or DVD-RW disc.
Editing_01_03
Note
• The ‘Erase’ function is applicable to DVD-R and
DVD+R discs. However, please note that the
application will not free up disc space already
used.
• You
CANNOT erase protected title(s).