Step 4: Connecting the
Power Cord
Connect the power cord to the DVD recorder. After
all the cable connections are completed, you can
now plug the power cord of the recorder into the
outlet, and start using the recorder.
Note
• If you use a model which features attached power
cord, you only need to plug the power cord to the
outlet at this step.
System Setup
Use the Setup menu to quickly complete basic
system settings before using the DVD recorder. If
you wish to exit the Setup menu at any time, simply
press the SETUP button again.
Each option icon on the Setup menu represents
an entry point to more detailed system setup lists.
Please press buttons on your remote
control to make selection, and confi rm it with the
ENTER button.
Guide to Complete System Setup Menu
(p.72)
Before you start...
1.
Check whether the video signal from this
DVD recorder is correctly displayed on your
TV screen.
Connecting up Your DVD Recorder (p.14)
To Next Page
Loading...
