The channel selected will then be switched on or off.
3
To switch on or off other channels, repeat steps
1-2 to complete the settings.
Fine-Tuning TV Channels
After you have performed the channel scanning,
you may like to fi ne-tune the TV channel signal
manually. Please follow the steps listed below to
complete the function.
1
Press to select a channel from the list,
then press ENTER.
2
Press to select ‘Fine Tune’, then press
ENTER.
4
When completed, press to select
‘Exit’ or another option to continue, then press
ENTER.
Setting the VCR Plus+
®
System
Before you start...
1.
Check if your model features the VCR
Plus+
®
system support.
Model Comparison Chart (p.4)
The VCR Plus+
®
system is a specially-designed
feature for recording TV programs. The system
greatly simplifi es the timer recording process,
as it does not require users to enter program
information, such as date, channel number and
start/end time, which are all contained in PlusCode
programming numbers. You can complete the timer
recording setup simply by inputting the PlusCode
number, which can be found in most newspapers,
TV listing magazines or online sources.
Setting up VCR Plus+
®
System
As channel numbers may vary depending on where
you live, it is suggested that you build up a match-
ing channel list when you fi rst set up the DVD
recorder. This step will help you to make use of
the VCR Plus+
®
system for future timer recording
settings.
1
Press TV or press SOURCE to set ‘TV’ as the
signal source.
2
Press EDIT to display the Channel Editor
menu.
To Next Page
Loading...
