1. Indicates the storage capacity available on the
destination disc for a particular recording mode.
2.
Indicates the current system date.
3.
Indicates the current system time.
4.
Indicates the page you are viewing.
5.
Indicates the PlusCode number of your desired
TV program(s).
6.
Indicates the assigned recording mode.
7. Indicates a new Timer Program. Press to start
setting a Timer Program.
8. Indicates the ‘Exit’ function. Press to exit the
Timer Program menu.
Setting Timer Program
(Date/Time Mode)
1
Press TIMER to display the Timer Record
menu.
2
Press ENTER to start new setting, or press
to select a previous setting which you
would like to modify.
3
Press to select ‘Source’ (Signal Source),
then press ENTER to go to the sub-menu.
Press to select, then ENTER to confi rm
your selection.
4
Press or the number buttons (0-9) to select
‘Channel’ (TV Channel), then press ENTER to
go to the sub-menu. Press to select, then
ENTER to confi rm your selection.
This step is required only when ‘TV’ is selected as the
source.
5
Press to select ‘Mode’ (recording mode),
then press ENTER to go to the sub-menu.
Press to select, then ENTER to confi rm
your selection.
6
Press to select ‘Repeat’ (Once/Daily/
Weekly), then press ENTER to go to the
sub-menu.
6.1 Once
If you select ‘Once’, you need to set the date.
Go to ‘Date’, then press ENTER. Press the
number buttons (0-9) or to enter the
date.
6.2 Daily
If you select ‘Daily’, you do not need to set the
date, since the Timer Record program will be
automatically set for each day until the setting
is cancelled or the destination medium has no
more storage capacity.
6.3 Weekly
If you select ‘Weekly’, a weekly calendar will
be displayed on screen for you to select the
day.
To Next Page
Loading...
