Introducing Edit Menu
You can activate the Edit menu by pressing the
EDIT button on your remote control during
playback.
1. Indicates the PIP window, where the last image
of the disc being played is shown.
2. Indicates the editing options.
3. Indicates the ‘Exit’ function. Press to exit the
Edit menu.
Editing Titles
Naming a Title
1
Press OPEN/CLOSE to open the disc tray.
2
Carefully place the disc on the tray with the
label side facing up, then press OPEN/
CLOSE.
3
A disc menu will appear. Press to
select the title you would like to edit, then
press ENTER.
4
Playback will then start.
5
Press EDIT to display the Edit menu.
6
On the Edit menu, press to select
‘Rename’, then press ENTER.
The on-screen input keypad will be displayed.
On-Screen Input Keypad (p.29)
7
Press to select the ‘Clear” fi rst, then press
ENTER before starting to enter the new title.
8
Press to select desired letters,
numbers or punctuation marks, then press
ENTER.
You can enter up to 30 characters for a title name.
9
If you want to make changes during the
entering process, press to select
‘Back’, which allows you to delete character
by character in a backward direction, then
press ENTER.
If you want to delete all the characters you
have entered, press to select ‘Clear’,
the press ENTER.
To Next Page
Loading...
