LiteOn LVW-5115GHC+ - Using Easy Guider: Timer Record

34
and DVD+R/+RW discs to record. However,
please note that if you use blank DVD-RW discs,
you will need to format the discs before recording.
Pressto select ‘Quick Preparation’ or ‘Full
Preparation’, then press ENTER.
Recording_01_03
1
On the Easy Guider menu, press  to select
‘Record’, then press ENTER.
EasyAccess_EasyGuider_03_01
EasyAccess_EasyGuider_03_01
2
Press  to select the signal source on which
the program you would like to record is being
broadcast or played, then press ENTER.
If you select ‘TV’, press  to select
the channel you want to record, then press
ENTER.
3
Press  to select a recording mode, then
press ENTER.
Media Mode Rec. Time
4.7 GB
Recordable
& Rewritable
DVD Disc
HQ (High Quality) 1 hour
SP (Standard Play)
2 hours
LP (Long Play)
3 hours
EP (Extended Play)
4 hours
SLP (Super Long Play)
6 hours
4
Press ENTER to start recording.
5
Press  STOP to stop recording.
Press PAUSE/STEP to pause recording.
Press PAUSE/STEP again to resume
recording.
Note
• If you are using models which support double-
layer DVD recording, please be reminded that
one recording session in double-layer discs
cannot exceed 8 hours. Once the session has
lated for over 8 hours, this DVD recorder will
automatically stop recording.
Using Easy Guider: Timer
Record
Before you start...
1.
Check whether you select and insert a
recordable disc.
Guide to Using the Discs (p.74)
2.
Check whether the system date and time of
the DVD recorder is correct.
Setting System Time (p.18)
3.
Check whether there is enough space on the
disc.
4.
Check whether the channel scanning process
for your TV is completed.
Setting TV Channels (p.22)