LiteOn LVW-5115GHC+ - Page 29

26
Note
• After you insert channel(s), numbers of other
channels will change accordingly.
Swapping TV Channels
1
Press  to select a channel from the list,
then press ENTER.
2
Press  to select ‘Swap’, then press
ENTER.
Starteww wwwwwwwd_Advanced_02_06
3
Press  or the number buttons to enter
the channel number, then press
ENTER.
Started_Advanced_02_07
The channel will be swapped to the designated location.
4
To swap other TV channels, repeat steps 1-3 to
complete the settings.
Renaming TV Channels
This DVD recorder offers an on-screen input
keypad for users to complete the naming/renaming
process. Please press  and ENTER
buttons on your remote control to select your
desired letters, numbers or punctuation marks. For
more information about how to use the keypad,
please see the section ‘On-Screen Input Keypad’.
1
Press  to select a channel from the list,
then press ENTER.
2
Press  to select ‘Rename’, then press
ENTER.
Started_Advanced_02_08
The keypad screen will be displayed.
3
Press  to select desired characters
from the keypad, then press ENTER after each
entry.
4
When completed, press  to select
‘Finish’, then press ENTER.
Note
• You can enter up to 10 characters for a name.
Enabling/Disabling TV
Channels
The automatic scanning process will list all the
available channels for your reference. You can
further edit this list by activating the ‘Enable/Dis-
able’ function, which allows you to temporarily
remove unwanted channel(s) from the list or add
the previously disabled channel(s) back to the list.
1
Press  to select a TV channel which
you would like to switch on/off, then press
ENTER.
2
Press  to select ‘Enable’ or ‘Disable’, then
press ENTER.