LiteOn LVW-5115GHC+ - Page 26

23
Getting Started
Started_Advanced_01_04
4
Press  to select the region where you are
currently situated, then press ENTER.
Started_Advanced_01_05
5
When completed, pressto return to the main
menu.
6
Press  or SETUP to completely exit the
Setup menu.
Note
• List of available countries/regions may vary
depending on model types.
Step 3: Scanning TV
Channels
1
Press SETUP to display the Setup menu.
2
Press  to select ‘TV Tuner’, then press
ENTER.
3
Press  to select ‘Utilities’, then press
ENTER.
Started_Advanced_01_06
4
Press  to select ‘Scan Channel’, then press
ENTER.
Started_Advanced_01_07
The DVD recorder will start searching for available
channels.
5
When completed, pressto return to the main
menu.
6
Press  or SETUP to completely exit the
Setup menu.
Note
• When the ‘Scan Channel’ function is activated,
the TV channels are scanned and stored in a spe-
cifi c order. If your TV content provider changes
the channel listing, or if you are reinstalling this
DVD recorder, you may need to go through this
process again.