EasyManua.ls Logo

LiteOn LVW-5115GHC+ - Page 39

LiteOn LVW-5115GHC+
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note
This DVD recorder allows users to enter a
maximum of 16 Timer Record programs. If your
setting list is full, you will need to delete some of
the programs before you can input new ones.
This DVD recorder allows users to enter date up
to 2099/12/31 (December 31, 2099). Date beyond
this day CANNOT be set.
Setting System Date (p.17)
If you are using models which support double-
layer DVD recording, please be reminded that
one recording session in double-layer discs
cannot exceed 8 hours. Once the session has
lated for over 8 hours, this DVD recorder will
automatically stop recording.
Timer Recording through
VCR Plus+
®
System
Before you start...
1.
Check if your model features the VCR
Plus+
®
support.
Model Comparison Chart (p.4)
1
On the Easy Guider menu, press  to select
‘Timer Record’, then press
ENTER.
2
Press  to select ‘VCR Plus+ Setting’, then
press ENTER.
EasyAccess_EasyGuider_04_04
EasyAccess_EasyGuider_04_04
3
Press  to select ‘Once’, ‘Daily’ or
‘Weekly’.
4
Press the number buttons (0-9) to enter the
PlusCode number, then press
ENTER.
EasyAccess_EasyGuider_04_05
EasyAccess_EasyGuider_04_05
EasyAccess_EasyGuider_04_05
5
The ‘Preset Channel’ dialogue box will then
appear, if the DVD recorder fails to fi nd
information of a corresponding channel. Press
to enter the channel number shown on
your TV, then press
ENTER.
EasyAccess_EasyGuider_04_05
EasyAccess_EasyGuider_04_05
EasyAccess_EasyGuider_04_05
Note
To make use of the VCR Plus+
®
system for timer
recording, you need to match the GCNs (guide
channel numbers) used by the VCR Plus+
®
system with the channel numbers shown on
your TV, so that the relevant information can be
correctly assigned to the programs you would
like to record.
6
Press  to select a recording mode, then
press ENTER.
7
The Timer Program information will appear.
Press ENTER to exit the Timer Record setting.
Note
Please skip the section, if your DVD recorder
does not support this feature.
If you are using models which support double-
layer DVD recording, please be reminded that
one recording session in double-layer discs
cannot exceed 8 hours. Once the session has
lated for over 8 hours, this DVD recorder will
automatically stop recording.

Table of Contents

Related product manuals