Connecting the video camera
The camera can be connected either before or after powering on the Solo PRO.
Only one camera can be connected directly to the Solo PRO at one time. You cannot
connect two cameras to both the SDI interface and to the HDMI interface at the same time.
You can remove the Solo PRO from the protective sleeve and mount the unit on the camera,
using a camera mount.
To connect the video camera:
1. Connect one end of the camera cable to the Video Out port on the camera.
2. Connect the other end of the cable to either the HDMI or SDI interface on the Solo
PRO.
You can connect a camera to only the HDMI interface or the SDI interface. Do not
connect two cameras to each interface.
Connecting the video camera
Solo PRO User guide 26
To Next Page
Loading...
