Safety information
▪ Do not disassemble this product.
▪ Do not remove its cover or its back. There are no user-serviceable
parts inside.
▪ Refer servicing to qualied service personnel only.
▪ The use of controls, adjustments or procedures other than those
specied in the guide may result in exposure to shock and/or
electrical or mechanical hazards.
▪ The Solo PRO contains an internal battery that is not designed to
be removed by users. Note the following guidelines:
• Required operation rated temperatures:
◦ Charging: -5 to +35 degrees C
◦ Discharging mode operation: -5 to +45 degrees C
• 10.5-17 VDC input powered operation: -5 to +45 degrees C
• Avoid shorting the battery.
• Do not immerse the unit in water.
• Do not disassemble or deform the battery.
• Do not expose the unit to re and do not dispose of the unit
and its internal battery in re.
• Avoid excessive physical shock or vibration of the unit.
• Never use a unit that contains a battery that appears to have
suffered abuse.
▪ Store the Solo PRO in an environment with low humidity that is free from corrosive gas,
and in temperatures from -20°C to 60°C, < 80% RH.
▪ Use only the originally approved power supply adapter.
▪ Use only the supplied accessories. Accessories (including cables) must not be replaced.
▪ Do not use the product if there is any physical damage to the enclosure.
▪ Keep all air inlets and outlets free of any objects that may interfere with the air ow for
at least 10 cm.
▪ It is normal for the product to become slightly hot during use. However, if the
enclosure's temperature becomes unbearable to touch, turn the product off and contact
support.
▪ Avoid leaving the product unprotected in direct sunlight for more than ve minutes.
▪ Do not let the product come into contact with corrosive materials.
▪ Do not let the product come into contact with explosive or corrosive gas.
Safety information
Solo PRO User guide 28
To Next Page
Loading...
