LIVOX HAP
User Manual
©
2022 Livox Tech All Rights Reserved.
19
First, check the surface of the optical window to see if cleaning is necessary. If it is necessary to
clean, follow the steps below:
1. Use compressed or canned air:
DO NOT wipe a dusty optical window as it will only cause more damage. Clean the optical
window with compressed or canned air before wiping the optical window.
Note that if the optical window has no visible stains afterward, it is unnecessary to wipe it.
2. Wipe the stains:
DO NOT wipe using a dry lens tissue, as it will scratch the surface of the optical window. Use
a lens tissue and dampen with isopropyl alcohol.
If the optical window is still dirty, a mild soap solution can be used to gently wash the window.
Repeat Step 2 to remove any remaining soap residue.
To Next Page
Loading...
