Livox HAP - Overview of HAP (TX) Components; Device Component Descriptions

LIVOX HAP
User Manual
©
2022 Livox Tech All Rights Reserved.
7
Overview
7
1
2
3
4
5
6
Visit the DJI ocial store to purchase the Livox Aviation Connector 1-to-3 Splitter Cable. The
Livox Aviation Connector 1-to-3 Splitter Cable can only be used for testing and debugging.
It is recommended to customize the cable and connectors for other scenarios that require
high reliability.
1. Optical Window
The laser passes through the optical
window and scans objects in the FOV.
2. Locating Hole 1
The locating hole makes it easy for users
to nd the correct place to mount a xed
support for the HAP (TX). Refer to the
Dimensions section for more information.
3. M6 Mounting Through-Hole (φ6.5) × 4
Users can mount the HAP (TX) to an
appropriate place using M6 screws.
4. M12 Aviation Connector
The M12 aviation connector can be
connected to the Livox Aviation Connector
1-to-3 Splitter Cable (sold separately)
for quick testing and debugging. Users
can also customize cables according to
the pinout reference table to improve the
waterproof and dustproof protection of
the HAP (TX). Refer to the Connectors
section for more information on the M12
aviation connector.
5. M3 Mounting Hole × 4
Users can mount the HAP (TX) to an
appropriate place with M3 screws.
6. Locating Hole 2
The locating hole makes it easy for users
to nd the correct place to mount a xed
support for the HAP (TX). Refer to the
Dimensions section for more information.
7. Waterproof Breathable Valve
The waterproof breathable valve can help
balance the pressure dierence between
the inside and outside of the HAP (TX).