LNTECH SLA-3

29
Item Content Method Check Period
Checkout
Interception
test(check every
light beam)
To block each beam to
conrm indicators work
normally and normal
output
Before operation
Check the fastener
Check and ensure of all
fasteners xed
Every 6 months
Maintenance
Clean the housing
Clean with soft cotton
yarn soaked water
or detergent, prohibit
cleaning with organic
solvent
according to the
situation
Tighten fastener
Fix loosen screws tightly,
replace the damaged
ones
according to the
situation
Need check the device before operation apart from the periodic
checkout
●
Before operation, check to ensure the SLA-3 device work normally.
●
Do not change the device position at random.
●
W
hen a malfunction happened, need the professional technicians
to check and repair.
●
Should switch off power before dismounting the light curtain by
the professional technicians
●
Allow to change mould with the same overrun distance, otherwise
need adjust the SLA-3 position by professional technicians
7.1 Cautions
7 Checkout and Maintenance
7.2 Checkout and Maintenance