6 Trouble shooting
6.1 Display does not light up
· Check that the mains plug is correctly inserted in the wall-socket.
· Check the mains supply to the wall-socket.
· Check the fuses in the mains output and replace if necessary.
· Check the brightness adjustment of the LED-display
6.2 Error-codes
The control panel has an internal diagnostic program to ensure correct functioning of the
Valiant. Three error codes can occur:
1. System error
2. Watchdog error
3. Bus error
If these errors occur, the Valiant should be switched off for at least 10 seconds before
switching it on again. If the code persists, you should contact your dealer.
Appearance of any other error-code is an indication you should also contact your dealer.
To Next Page
Loading...
