Loewe Connect 32 User Manual (English)

Other manuals for Loewe Connect 32

Questions and Answers:

B
Bonnie BennettAug 22, 2025
Why is there no sound via the external digital audio amplifier on my Loewe Connect 32?
- D
  Donald CowanAug 22, 2025
  There are a couple of potential reasons why you might not be getting sound through your external digital audio amplifier: 1. The external digital audio amplifier might not support the selected sound format (Dolby Digital, dts, MPEG). To resolve this, set PCM stereo on the DVD player in the sound selection. For DVB stations on the TV set, switch to stereo in the status display (END) – language/audio selection (Green button). 2. The TV set and external digital audio amplifier might not be properly connected. Ensure you connect AUDIO DIGITAL OUT from the TV set to a Digital-In input of the external digital audio amplifier and select the appropriate input on the amplifier.
A
Andrew TurnerSep 1, 2025
Why is the photo on the USB stick not displayed correctly in the PhotoViewer or a '?' appears on Loewe Connect 32 LCD TV?
- S
  Stephen AndersonSep 2, 2025
  If a photo on your USB stick isn't displaying correctly in the PhotoViewer, or if a '?' appears, it's likely that the photo isn't in a displayable format. Convert the photo file into a standard JPG format on your PC.
C
Charlene CamposAug 31, 2025
What to do if all menus are displayed in the wrong language on Loewe Connect 32 LCD TV?
- H
  harmonmorganAug 31, 2025
  If all the menus are displayed in the wrong language, it means the menu language was set incorrectly. To fix this, set the menu language by pressing the INFO button in TV mode (Index). Mark the first key word and call it with OK. Then select the language and confirm with OK.
E
everettlucasAug 30, 2025
How to fix connection of a decoder that does not function properly on Loewe Connect 32 LCD TV?
- W
  williamreynoldsAug 30, 2025
  If your decoder connection isn't working correctly, consider these points: * The signal may not be decoded because the correct decoder stations haven't been selected in the connection wizard. Follow the instructions in the connection wizard (TV menu ? Connections ? New devices/changes) and select the appropriate decoder transmitter. * If sound is missing in decoder mode, the wrong decoder sound may have been assigned in the connection wizard. Follow the instructions in the connection wizard and select the correct audio source (Decoder, TV oder Autom.), see also decoder instructions.
J
John LittleAug 28, 2025
Why is Digital Link Plus not working on my Loewe Connect 32 LCD TV?
- A
  Ashley WrightAug 29, 2025
  If Digital Link Plus isn't functioning, it could be due to these reasons: * The EURO-AV cable might not be fully wired (pin 10 not wired). Try replacing the EURO-AV cable. * Some recorders can only adopt stations during the initial installation of the TV set. Restore the recorder to its factory settings (refer to the recorder's operating manual).
J
jacksonsusanAug 27, 2025
What to do if the picture of a connected external recorder is visible but the timer cannot be called on Loewe Connect 32?
- D
  David MortonAug 27, 2025
  If the picture from an external recorder is visible but the timer function cannot be used, the device might not be registered in the connection wizard or is connected differently than shown in the connection diagram. In the connection wizard (TV menu ? Connections ? New devices/modifications) compare the connection diagram with the actual installation and connect as illustrated.
S
susan14Aug 27, 2025
What to do if the picture of a connected external recorder is visible but the error message no recorder available is still output on Loewe Connect 32?
- W
  wturnerAug 27, 2025
  If you see the picture from your external recorder but get a 'no recorder available' error, the device may not be registered in the connection wizard or is connected differently than shown in the connection diagram. In the connection wizard (TV menu ? Connections ? New devices/modifications) compare the connection diagram with the actual installation and connect as illustrated.
R
rosethomasAug 25, 2025
What to do if general problems when connecting external devices via an AV input on Loewe LCD TV?
- J
  Jeffrey AustinAug 26, 2025
  If you're experiencing general issues connecting external devices via AV input, here's what to check: 1. Make sure the device is logged in to the connection wizard or is connected as shown in the connection diagram. Compare the connection diagram with the actual installation in the connection wizard (TV menu ? Connections ? New devices/modifications) and connect as illustrated. 2. Verify that the AV standard is set correctly. Set the correct standard. 3. Confirm the signal type is set correctly. Set the correct signal type. Note: If 'Automatic' is set for AV standard or AV signal, it might cause errors with non-standard signals. In this case, set the standard and signal according to the external device's operating manual.
R
Ronald KnightAug 25, 2025
What to do if control functions of Loewe Recorder and Timer are not working on my Loewe Connect 32?
- F
  frenchjohnAug 25, 2025
  If the control functions for the Loewe Recorder and Timer aren't working correctly, consider the following: * Ensure that the Digital Link function is activated in the recorder. Refer to the recorder's operating instructions for details. * Check that the EURO-AV cable is properly connected. * Verify that the recorder is registered.