10
The outdoor wireless weather sensor is calibrated to be pointed north for maximum accuracy.
However, for your convenience, if you are a user located in the Southern Hemisphere, you canuse
the sensor with the wind vane pointing south.
1. Mount and install the wireless weather sensor with the N marker (near the rain collector)
pointing South, instead of North. (Please refer to Mounting the Sensor on a Pole for mounting
instructions.)
POINTING THE WIRELESS 7-IN-1 OUTDOOR SENSOR TO SOUTH (OPTIONAL)
MOUNTING THE SENSOR ON A POLE
1. Stick the rubber pads on the inside of the mounting clamp and mounting base of the sensor.
2. Insert two (2) screws into the mounting base and clamp. Then, loosely tighten the screws using
included nuts.
3. Place the mounting xture over a pole (not included).
4. Tighten all the screws so the sensor sits rmly and securely on the pole.
Add rubber pad
before mounting
on pole
Point to
NORTH
Point to
SOUTH
2 Meter
of the
ground
Mounting pole
and stand not
included
To Next Page
Loading...
