9
INSTALLATION INSTRUCTIONS
SETTING UP THE WIRELESS 7-IN-1 OUTDOOR SENSOR
INSTALLING THE RAIN FUNNEL
INSTALLING THE BATTERIES
The wireless 7-in-1 outdoor sensor measures wind speed, wind direction, rainfall, UV, light intensity,
temperature, and humidity for you.
1. Align the lock grooves on the rain funnel with the lock grooves in the rain collector.
2. Lower the rain funnel onto the rain collector. Then, turn the rain funnel clockwise to lock it in place.
1. Unscrew the battery door at the bottom of the 7-in-1 outdoor sensor using a screwdriver (not
included).
2. Insert three (3) AA batteries (not included) into the battery compartment.
3. Close and fasten the battery door back on the compartment.
To Next Page
Loading...
