USER MANUAL SMARTneo // PAGE 7
Don‘t change or convert components
The components must never be changed or converted.
Danger of crushing when changing the tabletop height
There is a crushing hazard if the table top position is changed.
Therefore always make sure that there are no items or persons in
the danger zone and that no one reaches into the danger zone.
Risk of explosion
Do not operate the components in a potentially explosive atmo-
sphere.
Usage by children and persons with restriction
This device can be used by children above the age of 8 years as
well as by persons with reduced physical, sensorial or mental
capacities or a lack of experience and knowledge if they are
supervised or were instructed in the safe use of the device and
understand the resultant hazards. Children may not play with
the device.
Danger in case of damage
When an electrical line is damaged, it must be replaced imme-
diately through the manufacturer or on the customer service in
order to prevent further damage. Recommissioning must not be
done until the fault removal has taken place.
Danger in case of humidity
Do not use the motor control unit outside or in wet areas!
Ensure ESD-oriented handling during the unpacking.
Errors that can be attributed to electrostatic discharge will void
warranty claims.
Danger due to liquids or heated surfaces
Never dip the connection cable or parts of the hand control into
liquids and keep the connection cable away from heated surfa-
ces.
To Next Page
Loading...
Need help?
General
